LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS F >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel >> Fuel Pump Resistor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump Resistor: Installation

  1. INSTALL FUEL PUMP RESISTOR 
    1. Install the fuel pump resistor and engine wire with the 2 bolts.

      Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf) 

      Fig 1: Locating Fuel Pump Resistor And Engine Wire With Bolts
      G05750120Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the fuel pump resistor connector and clamp.
      3. Fig 2: Locating Fuel Pump Resistor Connector And Clamp
      G05750121Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL ENGINE ROOM SIDE COVER RH  (See INSTALLATION )
  3. INSTALL COOL AIR INTAKE DUCT SEAL  (See INSTALLATION )
scientia non olet · About LEMON Manuals