Data List / Active Test

HINT

Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other item to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed Performing Active Tests early in troubleshooting is one way to save diagnostic time Date List information can be displayed while performing Active Tests

1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG)
3. Turn the Techstream on
4. Enter the following menus Body Electrical / Combination Meter / Active Test.
5. Perform the Active Test according to the display on the Techstream

   Combination Meter 

   COMBINATION METER REFERENCE
   
   

   Tester Display	Test Part	Control Range	Diagnostic Note
   Driver Side Seat Belt	Driver side seat belt indicator light	OFF/ON	Confirm that the vehicle is stopped with the engine idling
   Front Passenger side Seat Belt	Front passenger side seat belt indicator light	OFF/ON	Confirm that the vehicle is stopped with the engine idling