Steering Wheel: Installation

INSTALL STEERING PAD ATTACHING SCREW
1. Install the 2 steering wheel pad attaching screws to the lower steering wheel boss cover.
  
  Fig 1: Identifying Steering Pad Attaching Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LOWER STEERING WHEEL BOSS COVER
1. Engage the 2 claws to install the lower steering wheel boss cover to the steering wheel sub-assembly.
  
  Fig 2: Identifying Lower Steering Wheel Boss Cover Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the 2 screws
INSTALL SHIFT PADDLE SWITCH (See INSTALLATION )
INSTALL CRUISE CONTROL SWITCH WIRE
INSTALL CRUISE CONTROL MAIN SWITCH (See INSTALLATION )
INSTALL STEERING PAD SWITCH ASSEMBLY (See INSTALLATION )

Fig 3: Identifying Lower Steering Wheel Boss Cover Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL STEERING SHAKE DAMPER
1. Install the steering shake damper to the steering wheel assembly.
2. Install the 2 screws
TURN FRONT WHEELS TO FACE STRAIGHT AHEAD
ADJUST SPIRAL CABLE (See INSTALLATION )

Fig 4: Identifying Steering Shake Damper Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL STEERING WHEEL ASSEMBLY
1. Align the matchmarks on the steering wheel assembly and steering main shaft.
2. Install the steering wheel assembly set nut
  Torque: 50 N*m (510 kgf*cm, 37 ft.*lbf)
3. Connect the connectors to the spiral cable sub-assembly.
INSTALL STEERING PAD (See INSTALLATION )
INSTALL LOWER NO. 3 STEERING WHEEL COVER (See INSTALLATION )
INSTALL LOWER NO. 2 STEERING WHEEL COVER (See INSTALLATION )
INSPECT STEERING WHEEL CENTER POINT
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Fig 5: Identifying Matchmarks On Steering Wheel Assembly And Steering Main Shaft
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
INSPECT STEERING PAD (See INSTALLATION )
INSPECT SRS WARNING LIGHT
See DIAGNOSIS SYSTEM