LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS F >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Shift Lever >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Shift Lever: Inspection

  1. INSPECT SHIFT LOCK CONTROL ECU 
    1. Measure the voltage according to the values in the table below

      HINT.

      Do not disconnect the shift lock control ECU connector.

      Standard Voltage 

      STANDARD VOLTAGE SPECIFICATION

      Tester Connection Condition Specified Condition
      7 (STP) - 8 (E) Brake pedal depressed 11 to 14 V
      7 (STP) - 8 (E) Brake pedal released Below 1 V
      1 (IG) - 8 (E) Engine switch on (IG) 11 to 14 V
      1 (IG) - 8 (E) Engine switch off Below 1 V
      Fig 1: Identifying Shift Lock Control ECU Connector Terminal
      G05750924Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Measure the resistance according to the value in the table below.

      HINT.

      Do not disconnect the shift lock control ECU connector.

      Standard Resistance 

      STANDARD RESISTANCE SPECIFICATION

      Tester Connection Condition Specified Value
      8 (E) - Body ground Always Below 1 Ω
      Fig 2: Identifying Shift Lock Control ECU Connector Terminal
      G05750925Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals