LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS F >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Shift Lever >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Shift Lever: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY  (See REMOVAL )
  3. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH  (See REMOVAL )
  4. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH  (See REMOVAL )
  5. REMOVE CONSOLE PANEL SUB-ASSEMBLY  (See REMOVAL )
  6. REMOVE FRONT ASH RECEPTACLE ASSEMBLY  (See REMOVAL )
  7. REMOVE REAR ASH RECEPTACLE ASSEMBLY  (See REMOVAL )
  8. REMOVE CONSOLE BOX REGISTER ASSEMBLY  (See REMOVAL )
  9. REMOVE CONSOLE BOX  (See REMOVAL )
  10. REMOVE NO. 2 CONSOLE BOX DUCT  (See REMOVAL )
  11. REMOVE NO. 2 FLOOR UNDER COVER  (See REMOVAL )
  12. REMOVE NO. 1 FLOOR UNDER COVER  (See REMOVAL )
  13. REMOVE TAIL EXHAUST PIPE ASSEMBLY  (See REMOVAL )
  14. REMOVE REAR NO. 1 FLOOR PANEL BRACE  (See REMOVAL )
  15. REMOVE FRONT CENTER FLOOR BRACE  (See REMOVAL )
  16. DISCONNECT HEATED OXYGEN SENSOR  (See REMOVAL )
  17. REMOVE FRONT EXHAUST PIPE ASSEMBLY  (See REMOVAL )
  18. REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR  (See REMOVAL )
  19. REMOVE FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY 
    1. Set the shift lever to N
    2. Remove the nut and separate the floor shift gear shifting rod sub-assembly
      Fig 1: Locating Shift Lever Nut
      G05750919Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  20. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY 
    1. Disconnect the 2 connectors
    2. Remove the 4 clamps.
    3. Remove the 4 bolts.
    4. Remove the floor shift assembly.
      Fig 2: Locating Transmission Floor Shift Connectors With Clamps
      G05750920Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals