LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS F >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Shift Paddle Switch >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Shift Paddle Switch: Inspection

  1. INSPECT SHIFT PADDLE SWITCH 
    1. Disconnect the switch wire connector from the transmission shift switch
    2. Measure the resistance between each terminal when the paddle shift is moved to each position.

      Standard Resistance 

      STANDARD RESISTANCE SPECIFICATION

      Tester Connection Paddle Shift Position Specified Condition
      1 (SUP) - 2 (ECC) Pull continuously "+" (Up shift) Below 1 Ω
      1 (SUP) - 2 (ECC) Release "+" (Up shift) 10 kΩ or higher
      3 (SDN) - 2 (ECC) Pull continuously "-" (Down shift) Below 1 Ω
      3 (SDN) - 2 (ECC) Release "-" (Down shift) 10 kΩ or higher

      If the resistance value is not as specified, replace the shift paddle switch.

      Fig 1: Identifying Transmission Shift Switch Connector Terminal
      G05750793Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals