Shift Paddle Switch: Removal
CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (See
PRECAUTION
).
- ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
- REMOVE LOWER NO. 2 STEERING WHEEL COVER (See REMOVAL )
- REMOVE LOWER NO. 3 STEERING WHEEL COVER (See REMOVAL )
- REMOVE STEERING PAD (See REMOVAL )
- REMOVE STEERING WHEEL ASSEMBLY (See REMOVAL )
- REMOVE SHIFT PADDLE SWITCH
- Disconnect the clamp from the steering wheel assembly.
- Disconnect the switch wire connector from the steering wheel assembly.
- Disconnect the 2 connectors from the 2 shift paddle switches, and remove the switch wire.
- Remove the 4 screws, 2 brackets and 2 shift paddle switches.