Diagnostic Trouble Code Table
HINT:
If a trouble code is displayed during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the table below.
DIAGNOSTIC TROUBLE CODE TABLE
| DTC Code |
Detection Item |
Trouble Area |
| B2311 |
Power Window Motor Malfunction |
- Power window regulator motor
- Battery disconnection when engine switch on (IG)
- Incorrect installation of power window components
- Overheated power window regulator motor
|
| B2312 |
Power Window Switch Malfunction |
- Multiplex network master switch
- Power window regulator switch
- Power window regulator motor
- Harness or connector
- Multiplex network master switch held in same position for more than 20 seconds
- Power window regulator switch held in same position for more than 20 seconds
|
| B2313 |
Glass Position Initialization Incomplete |
- Power window regulator motor
- Power window regulator motor not initialized
|