Inspection Procedure
- CHECK LIN COMMUNICATION SYSTEM
- Check for LIN communication system DTCs related to the power window control system.
OK: LIN communication system DTCs are not output.
NG: GO TO LIN COMMUNICATION SYSTEM (See HOW TO PROCEED WITH TROUBLESHOOTING )
OK: Go to next step
- Check for LIN communication system DTCs related to the power window control system.
- CHECK MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY (WINDOW LOCK SWITCH)
- Turn the window lock switch OFF and operate the switches on the multiplex network master switch. Check that the remote UP/DOWN function operates normally.
OK: Remote UP/ DOWN function operates normally.
NG: Go to step 3
OK: END
- Turn the window lock switch OFF and operate the switches on the multiplex network master switch. Check that the remote UP/DOWN function operates normally.
- READ VALUE OF TECHSTREAM (MULTIPLEX NETWORK MASTER SWITCH)
- Use the Data List to check if the multiplex network master switch is functioning properly.
Master Switch:
DATA LIST TABLETester Display Measurement Item/Range Normal Condition Diagnostic Note P Door P/W Auto SW Front passenger side power window remote auto UP/ DOWN switch signal / ON or OFF ON: Front passenger side power window remote auto UP/DOWN switch on master switch operated
OFF: Front passenger side power window switch on master switch not operated- RR Door P/W Auto SW Rear power window RH remote auto UP/ DOWN switch signal / ON or OFF ON: Rear power window RH remote auto UP/DOWN switch on master switch operated
OFF: Rear power window switch RH on master switch not operated- RL Door P/W Auto SW Rear power window LH remote auto UP/ DOWN switch signal / ON or OFF ON: Rear power window LH remote auto UP/DOWN switch on master switch operated
OFF: Rear power window switch LH on master switch not operated- P Door P/W Up SW Front passenger side power window remote manual UP switch signal / ON or OFF ON: Front passenger side power window remote manual UP switch on master switch operated
OFF: Front passenger side power window switch on master switch not operated- RR Door P/W up switch Rear power window RH remote manual UP switch signal / ON or OFF ON: Rear power window RH remote manual UP switch on master switch operated
OFF: Rear power window switch RH on master switch not operated- RL Door P/W up switch Rear power window LH remote manual UP switch signal / ON or OFF ON: Rear power window LH remote manual UP switch on master switch operated
OFF: Rear power window switch LH on master switch not operated- P Door P/W Down SW Front passenger side power window remote manual DOWN switch signal / ON or OFF ON: Front passenger side power window remote manual DOWN switch on master switch operated
OFF: Front passenger side power window switch on master switch not operated- RR Door P/W Down SW Rear power window RH remote manual DOWN switch signal / ON or OFF ON: Rear power window RH remote manual DOWN switch on master switch operated
OFF: Rear power window switch RH on master switch not operated- RL Door P/W Down SW Rear power window LH remote manual DOWN switch signal / ON or OFF ON: Rear power window LH remote manual DOWN switch on master switch operated
OFF: Rear power window switch LH on master switch not operated- Window Lock Switch Status Power window LOCK switch / ON or OFF ON: Power window lock switch LOCK position
OFF: Power window lock switch UNLOCK position- OK: Techstream display changes normally when master switch is operated.
NG: REPLACE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY (See REMOVAL )
OK: REPLACE MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK)
- Use the Data List to check if the multiplex network master switch is functioning properly.