Data List/Active Test

HINT:

Using the Techstream to Perform the Active Tests allows relays, VSVs and actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

1. Warm up the engine.
2. Turn the engine switch off.
3. Connect the Techstream to the DLC3.
4. Turn the engine switch on (IG).
5. Turn the Techstream on.
6. Enter the following menus: Body Electrical / Air Conditioner / Active Test /
7. According to the display on the Techstream, perform the "Active Test".

   Air Conditioner 

   ACTIVE TEST TABLE
   
   

   Tester Display	Test Part	Control Range	Diagnostic Note
   Defogger Relay (Rear)	Rear window defogger relay operation	OFF / ON	-