Customize Parameters

HINT:

The following items can be customized.

1. Connect the Techstream to the DLC3.
2. Turn the engine switch ON (IG).
3. Turn the Techstream.
4. Enter the following menus: Customize Setting.
5. Select the setting by referring to the table below.

1. SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Starting) 

   Smart Key/Access 

   DEFAULT SETTING TABLE
   
   

   Display	Default	Contents	Setting
   Ignition Available Area	ALL	Function to choose the available area for key to start engine and cancel the steering lock.	FRONT/ALL

2. POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM 

   Tilt & Telesco 

   DEFAULT SETTING TABLE
   
   

   Display	Default	Contents	Setting
   Autoaway / Return function	ON	ON/OFF of the auto away / return function	ON/OFF

3. AIR CONDITIONING SYSTEM 

   Air Conditioner 

   DEFAULT SETTING TABLE
   
   

   Display	Default	Contents	Setting
   Set Temperature Shift	Normal	To control with the shifted temperature against the display temperature	+2°C /+1°C / Normal /-1°C/-2°C
   Air Inlet Mode	Automatic	In case of turning the A/C ON when you desire to make the compartment cool down quickly, this is the function to change the mode automatically to RECIRCULATION mode	Manual/Automatic
   Compressor Mode	Automatic	Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF	Manual/Automatic
   Compressor/Air Inlet DEF operation	Link	Function to turn the A/C ON automatically linked with the FRONT DEF button when A/C is OFF	Normal/Link
   Evaporator Control	Automatic	Function to set the evaporator control to the AUTOMATIC position (Automatic) to save power, or to the coldest position (Manual) to dehumidify the air and to prevent the windows from fogging up	Manual/Automatic
   Emission Gas Sensor Shift	Normal	Function to change the sensitivity of the exhaust gas sensor	Much More/More/Little More/Normal/Little Less/Less/Much Less
   Button Press Buzzer	ON	Function to sound a buzzer when button is pressed	OFF/ON
   Foot/DEF Auto Mode	ON	Function to turn the airflow from FOOT / DEF ON automatically when AUTO MODE is ON	OFF/ON
   Foot/DEF Automatic Blow Up Function	ON	Function to change the blower level automatically when the defroster is ON	OFF/ON
   Filter Sensor	Normal	Function to change the sensitivity of the air conditioning filter clogging sensor	Less/Normal/More
   Ambient Temperature Shift	Normal	Function to control the shifted ambient temperature in relation to the displayed ambient temperature	+3°C / +2°C / +1°C / Normal / -1°C / -2°C / -3°C

4. THEFT DETERRENT SYSTEM 

   Security 

   DEFAULT SETTING TABLE
   
   

   Display (Item)	Default	Contents	Setting
   Warning by Horn	ON	Function that allows vehicle horns and theft deterrent horn to be used as warning device.	ON / OFF
   Passive Mode (Security System)	OFF	Passive arming mode is a function that switches theft deterrent system from arming preparation state to armed state 30 seconds after key is not inside vehicle and driver side door is closed. In passive arming mode, theft deterrent system will judge that a theft is taking place and switch to alarm sounding state if one of the following operations are not performed within 14 seconds (see entry delay below) after door is opened: Unlock any door by key or wireless operation Turn engine switch ON (IG)	ON / OFF
   Entry Delay Time	14s	Function that changes entry delay time (time before warning starts) for PASSIVE ARMING MODE	0s/14s/30s

5. LIGHTING SYSTEM 

   Illuminated Entry 

   DEFAULT SETTING TABLE
   
   

   Display	Default	Contents	Setting
   I/L when ACC OFF	ON	Function to light the interior light when the engine switch is operated from ON (IG or ACC) to OFF	ON / OFF
   Lighting Time	15s	Function to change the lighting time after closing the door. (It will quickly fade out in case of turning the engine switch ON (IG))	7.5s/15s/30s
   Light Control	ON	Function to light up door inside handle light when the engine switch is ON (IG) and shift position is not P	ON / OFF
   I/L ON W/Door Key Unlock	ON	Function to light the interior light, etc. when the door is unlocked with a transmitter, door key or door lock control switch.	ON / OFF
   Mirr-Foot-Lgt Approached	ON	Door mirror foot light (when approaching vehicle)	ON / OFF
   Mirr-Foot-Lgt Unlocked	ON	Door mirror foot light (when unlocking doors)	ON / OFF
   Mirr-Foot-Lgt w/Master SW	ON	Door mirror foot light (when manually unlocking doors)	ON / OFF
   S-Belt-Bkl-Lgt/Door Open	ON	Seat belt buckle illumination (when door is open)	ON / OFF
   S-Belt-Bkl-Lgt/ACC OFF	ON	Seat belt buckle illumination (when electrical accessories are OFF)	ON / OFF
   Mirror Foot Light Time	15s	Door mirror foot light illumination duration	0s/7.5s/15s/30s
   Room Light when Aprchd	ON	Dome light illumination (when approaching vehicle)	ON / OFF
   Inside Foot Light	ON	Interior foot light illumination	ON / OFF
   Center Console Spot Light	ON	Center console spot light	ON / OFF

   Light Control 

   DEFAULT SETTING TABLE
   
   

   Display	Default	Contents	Setting
   Light Auto OFF Delay	30s	Function to keep on lighting the headlight for a certain period of time after closing all the doors with the engine switch turned from ON (IG) to off under the condition that the light control switch is at HEAD or AUTO with the headlight ON	OFF / 30s / 60s / 90s
   Sensitivity	Normal	Function to adjust the sensitivity of lighting illumination*1.	Light2 / Light1 / Normal / Dark1 / Dark2
   Disp Ex ON Sen	NORMAL	Changes brightness when lowering lights such as combination meter indicator light, A/C indicator light, and clock light. Refer to the graphic*2.	LIGHT2 / LIGHT1 / NORMAL / DARK1/DARK2
   Disp Ex OFF Sen	NORMAL	Changes brightness when canceling lowering lights such as combination meter indicator light, A/C indicator light, and clock light. Refer to the graphic*3.	LIGHT2 / LIGHT1 / NORMAL / DARK1/DARK2
   DRL Function	ON	DRL control	ON / OFF
   HINT: The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

   Fig 1: Identifying Light Adjusting Table (1 Of 3)

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   Fig 2: Identifying Light Adjusting Table (2 Of 3)

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   Fig 3: Identifying Light Adjusting Table (3 Of 3)

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. POWER DOOR LOCK CONTROL SYSTEM 

   Door Lock 

   DEFAULT SETTING TABLE
   
   

   Display (Item)	Default	Contents	Setting
   Auto Unlock/Shift (Unlock w/ engine switch ON (IG), shift P, speed 0 km/h (0 mph))	ON	Function that unlocks all doors when lever is shifted to P from any position other than P while the engine switch is ON (IG)	ON/OFF
   All Unlock/Open-Close (All unlock w/ D door open-close)	OFF	Function that unlocks all other doors when opening driver door within 10 seconds after turning the engine switch is ON (IG)	ON/OFF
   Unlock Key Twice (Unlock w/ 2 times D key operation)	ON	Function that unlocks only driver side door when driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. For OFF setting, turning it once unlocks all doors.	ON/OFF
   Auto Lock/Shift (Auto lock/shift not P)	ON*1 OFF*2	With engine running and all doors closed, function that locks all doors when lever is shifted to P from any position other than P	ON/OFF
   Auto Lock	OFF*1 ON*2	Function that locks all doors when vehicle speed reaches a certain level	ON/OFF
   HINT: *1: Except Korea *2: for Korea

7. WIRELESS DOOR LOCK CONTROL SYSTEM 

   Wireless Door Lock 

   DEFAULT SETTING TABLE
   
   

   Display	Default	Contents	Setting
   Hazard Answer Back	ON	When LOCK switch on transmitter is pressed, this function illuminates hazard warning lights once. When UNLOCK switch is pressed, hazard warning lights illuminate twice	ON/OFF
   Wireless Control	ON	Function that turns wireless door lock function ON or OFF	ON/OFF
   Open Door Warning	ON	If door is not completely closed and transmitter LOCK switch is pressed, this function makes buzzer sound for 10 seconds	ON/OFF
   Trunk Lid Operation	0.8 s	This function changes transmitter operation method for opening luggage compartment door	1 tim ON/2 tim ON/0.8 s/Prohibit
   Panic Alarm Function	ON	Function to operate theft deterrent system by continuously pressing panic switch on transmitter for 2.5 seconds	ON/OFF
   Unlock 2 Operation	ON	Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock.	ON/OFF
   Auto Lock Time	60s	Function to change time until relocking after unlocking with wireless door lock function	30s/60s/120s
   Wireless Auto Lock	ON	This function controls unlocking doors to automatic relocking function	ON/OFF

8. SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Door Lock) 

   Smart Key/Access 

   DEFAULT SETTING TABLE
   
   

   Display (Item)	Default	Contents	Setting
   Park Wait Time (Waiting time to permit unlocking door after locking)	2.5s	Function that sets waiting time to permit unlocking door after door is locked with entry lock function	0.5s/1.5s/2.5s/5s
   Trunk Open Mode (Luggage compartment door open mode when vehicle is locked)	ON	Function to permit opening luggage compartment door	ON / OFF

   Warning 

   DEFAULT SETTING TABLE
   
   

   Display (Item)	Default	Contents	Setting
   Key Low Battery Warning (Warn when key battery becomes weak)	ON	Function that warns driver that key's battery power is low	ON / OFF

   1. ENTRY UNLOCK MODE SWITCHING FUNCTION
      1. To use the entry unlock mode switching function, make sure the engine switch is OFF and simultaneously press and hold the key's LOCK switch and another key switch for 5 seconds. When the switches are pressed and held for 5 seconds, the entry door unlock mode changes in the following order: driver door unlock mode, one door unlock mode, doors on one side unlock mode, all door unlock mode.
         NOTE: After pressing and holding the switches for 5 seconds, wait 5 seconds before performing the same procedure again.

         • One door unlock mode:

           When a touch sensor is touched, the touch sensor's door unlocks. For example, if the driver door's touch sensor is touched, the driver door unlocks.

         • All door unlock mode:

           When a touch sensor is touched, all doors unlock.

         • Driver door unlock mode (default):

           When the driver door's touch sensor is touched, only the driver door unlocks. When another touch sensor is touched, all doors unlock.

         • Doors on one side unlock mode:

           When a touch sensor is touched, the doors on the side of the touch sensor unlock. For example, when the driver door's touch sensor is touched, the driver door and driver side rear door unlock.

           Fig 4: Identifying Multi-Information Display

           Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      2. The certification ECU receives this signal from the entry door control receiver and changes the smart access system with push-button start to the entry unlock mode.
      3. The certification ECU sounds the wireless door lock buzzer and combination meter buzzer to inform the user that the mode has been switched.

         HINT:

         The function only changes the entry unlock mode of the smart access system with pushbutton start. It does not switch the unlocking of the wireless door lock control.

         • One door mode:
           Fig 5: Identifying One Door Mode Information Table

           Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
         • All door unlock mode:
           Fig 6: Identifying All Door Mode Information Table

           Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
         • Driver door unlock mode:
           Fig 7: Identifying Driver Door Mode Information Table

           Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
         • Doors on one side mode:
           Fig 8: Identifying Doors On One Side Mode Information Table

           Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. The key cancel operation disables the following functions:
      • Entry Ignition
      • Entry Unlock / Lock
      • Entry Luggage Compartment Open
      • Key Lock-in Prevention
      • Warning
      • Memory Call
      1. The operation procedures are as follows: Precondition:

         Engine switch OFF, driver side door closed and unlocked.

         1. Unlock the driver side door once with the UNLOCK switch of the key.
         2. Open the driver door within 5 seconds.
         3. Unlock the driver side door twice with the UNLOCK switch of the key within 5 seconds.
         4. Perform close → open twice for the driver door within 30 seconds. (Driver door: Open condition → Close → Open → Close → Open)
         5. Unlock the driver side door twice with the UNLOCK switch of the key within 5 seconds.
         6. Perform close → open once for the driver door within 30 seconds. (Driver door: Open condition → Close → Open)
         7. Close the driver door within 5 seconds. When key cancel is activated, the wireless door lock buzzer sounds twice. To return to the original condition, perform the procedures again. When the original condition is returned, the wireless door lock buzzer sounds once.
9. METER/GAUGE SYSTEM 

   Warning 

   DEFAULT SETTING TABLE
   
   

   Display	Default	Contents	Setting
   Key Remind Volume	Large	To change volume of key reminder buzzer	Large / Medium / Small
   Key Remind Sound	Normal	To change frequency of key reminder buzzer	Normal / Fast / Slow
   Seat Belt Warning	D/PON	To change seat belt warning buzzer	D/P ON / D ON / P ON / D/P OFF

   Display 

   DEFAULT SETTING TABLE
   
   

   Display	Default	Contents	Setting
   Language	English	To change language of display	English / Spanish / French* / German* / Italian*
   HINT: *: for Except U.S.A.

   Unit conversion 

   DEFAULT SETTING TABLE
   
   

   Display	Default	Contents	Setting
   Units By Region	Ml/g US	To change unit of display	Km/I JP / Km/I / Ml/g US / Ml/g UK

10. INTUITIVE PARKING ASSIST SYSTEM 

    Warning 

    DEFAULT SETTING TABLE
    
    

    Display	Default	Contents	Setting
    Fr Sensor Onset Range	Wide	Function to set buzzer activation range (for front sensors)	Narrow or Wide
    Rr Sensor Onset Range	Wide	Function to set buzzer activation range (for rear sensors)	Narrow or Wide
    Keep Sense Buzzer	Avail	Function to make buzzer sound when distance between vehicle and obstacle does not change for more than 3 seconds	Not Avail or Avail
    Fr & Rr Buzzer Freq	Middle	Buzzer sounding frequency	Low, Middle or High
    Fr & Rr Buzzer Volume	M2	Buzzer volume setting	L, M1, M2, M3 or H

    Sensor 

    DEFAULT SETTING TABLE
    
    

    Display	Default	Contents	Setting
    Sensor Condition N	Avail	Function to make sensors available when shift position is N	Not Avail or Avail
    Front Side Dist Sensor	Long	Function to set buzzer activation range (for front sensors)	Short or Long
    Reverse Range Front Sensor	Fsde	Operation setting for vehicle front sensors (front center, front, front side) when shift lever is in R position	F, Fs, Fc, Fsde or F Stop
    Non P/R Range Rear Sensor	R Stop	Operation setting for vehicle rear sensors (rear center, rear) when shift lever is in position other than P or R	R, Rcm or R Stop

    Display 

    DEFAULT SETTING TABLE
    
    

    Display	Default	Contents	Setting
    Approach Display OFF	Avail	Display when moving away from previously detected obstacle	Not Avail or Avail
    Display Mode	All	Display mode setting (when intuitive parking assist system is normal)	All or Undisp

11. POWER WINDOW CONTROL SYSTEM 

    Power Window 

    DEFAULT SETTING TABLE
    
    

    Display	Default	Contents	Setting
    Door Key P/W Up	ON	Function that raises all power windows when, with engine switch OFF, key is used to hold driver door key cylinder to lock position for more than 2.3 seconds	ON/OFF
    Door Key P/W Down	ON	Function that lowers all power windows when, with engine switch OFF, key is used to hold driver door key cylinder to unlock position for more than 2.3 seconds	ON/OFF
    P/W Down W/ Transmit	ON	Function that lowers all power windows when, with engine switch OFF, unlock switch on key is pressed and held for more than 3.0 seconds	ON/OFF
    P/W Up W/ Smart	ON	Function that raises all power windows when, with engine switch OFF, entry lock switch on driver side door outer handle is pressed and held for more than 3.0 seconds	ON/OFF

12. FRONT POWER SEAT CONTROL SYSTEM 

    Seat 

    DEFAULT SETTING TABLE
    
    

    Display	Default	Contents	Setting
    Slide Link Hdrest Length Ctrl	Avail	Function to the physique compensation head-rest control when D-Seat is slide.	Avail / Not Avl
    Slide Link Cushion Length Ctrl	Avail	Function to the physique compensation Cushion Length control when D-Seat is slide.	Avail / Not AvI

13. POWER TRUNK LID SYSTEM 

    PSD & PBD operation 

    DEFAULT SETTING TABLE
    
    

    Display	Default	Contents	Setting
    PBD Power Operation	ON	Turns power trunk opener and closer function ON or OFF	ON / OFF

14. REAR SUNSHADE SYSTEM 

    Others 

    DEFAULT SETTING TABLE
    
    

    Display	Default	Contents	Setting
    Rear Shade Delay Time	0.7 s	Function to adjust reverse-linked sunshade lowering function's response time	0.7 s/1.2 s/0.9 s/0.0 s
    R-pos to Rear Sun Shade COM	ON	Reverse linked function	ON or OFF

15. SLIDING ROOF SYSTEM 

    Slide Roof 

    DEFAULT SETTING TABLE
    
    

    Display	Default	Contents	Setting
    Door Key Related Open	ON	Function to manually open sliding roof linked with power window if holding driver side door key for 3 seconds or more to unlock position when engine switch is OFF	ON / OFF
    Door Key Related Close	ON	Function to manually close sliding roof linked with power window if holding driver side door key for 3 seconds or more to lock position when engine switch is OFF	ON / OFF
    Wireless Key Related Open	ON	Function to manually open sliding roof linked with power window if pressing transmitter UNLOCK switch for 3 seconds or more when engine switch is OFF	ON / OFF
    Door Handle Lock Button	ON	Function to manually close sliding roof linked with power window if pushing door lock switch for 3 seconds or more when engine switch is OFF and key is outside vehicle	ON / OFF
    Door Key Related Operation	Slide	Function to select tilt up or slide open of manual sliding roof operation linked with power window activated by holding driver side door key for 3 seconds or more to unlock position when engine switch is OFF	Tilt/Slide
    Wireless Key Related Operation	Slide	Function to select tilt up or slide open of manual sliding roof operation linked with power window activated by pressing on transmitter UNLOCK switch for 3 seconds or more when engine switch is OFF	Tilt / Slide