Shoulder Belt Anchorage: Installation

HINT:

• Use the same procedures for the LH side and RH side.
• The procedures listed below are for the LH side.
• A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

1. INSTALL FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY 
   1. Install the seat belt with the 2 bolts. First install the upper bolt, and then install the lower bolt.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

   Fig 1: Locating Bolts And Adjuster

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL HEIGHT ADJUSTABLE ANCHOR MOTOR 
   1. Insert the motor into the adjuster as shown in the illustration.
   Fig 2: Locating Connector
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Install the connector.
3. INSTALL FRONT SEAT OUTER BELT ASSEMBLY 
   1. Install the front seat outer belt (see INSTALLATION ).