Floor Shift Assembly: Disassembly

REMOVE SHIFT POSITION INDICATOR
1. Remove the 2 screws and detach the 3 hooks. Then remove the shift position indicator from the rear console upper panel.
  
  Fig 1: Locating Shift Position Indicator Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CONTROL POSITION INDICATOR PLATE
1. Using a small screwdriver, detach the claw and remove the indicator plate.
  
  Fig 2: Removing Indicator Plate
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SHIFT LEVER CAP
1. Detach the 2 claws and remove the shift lever cap.
REMOVE POSITION INDICATOR LENS
1. Using a small screwdriver, detach the 4 claws and remove the lens from the shift position indicator.
  
  Fig 3: Identifying Shift Position Indicator Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE POSITION INDICATOR SLIDE COVER
1. Remove the position indicator slide cover from the shift position indicator.
2. Remove the No. 2 slide cover from the slide cover.
  
  Fig 4: Identifying Position Indicator Slide Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SHIFT LOCK RELEASE BUTTON
1. Using a small screwdriver, detach the claw and remove the button.
  
  Fig 5: Removing Shift Lock Release Button
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY
1. Disconnect the connector clamp.
2. Using a small screwdriver, detach the 2 claws and remove the wire.
  
  Fig 6: Removing Indicator Light Wire Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002