Automatic Transaxle: TCM: Removal
- REMOVE COWL TOP VENTILATOR LOUVER (See REMOVAL )
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY
- Remove the 2 clips and air cleaner inlet cover.
- REMOVE ENGINE ROOM SIDE COVER LH
- REMOVE ENGINE ROOM ECU COVER NOTE:
- Wipe off any water on or around the engine room ECU cover.
- Perform these procedures in a dry place away from rain, etc.
- Do not allow water to enter the ECM through its connector areas, screw areas, etc.
- Remove the 3 bolts and engine room ECU cover.
- REMOVE TCM
- Disconnect the 4 connectors.
- Remove the 2 nuts and TCM.