DTC Check / Clear
- CHECK DTC
- Connect the intelligent tester or Techstream to the DLC3.
- Turn the power switch ON (IG).
- Turn the tester on
- Enter the following menus:
- Intelligent tester - Select: DIAGNOSIS / OBD/ MOBD / (desired system) / DTC INFO.
- Techstream - Select: Body Electrical / (desired system) / Trouble Codes.
- Read the DTCs by following the directions on the tester's screen
HINT:
Refer to the intelligent tester or Techstream operator's manual for further details.
- CLEAR DTC
- Connect the intelligent tester or Techstream to the DLC3.
- Turn the power switch ON (IG)
- Turn the tester on
- Enter the following menus.
- Intelligent tester - Select: DIAGNOSIS / OBD/ MOBD / (desired system) / DTC INFO
- Techstream - Select Body Electrical / (desired system) / Trouble Codes
- Erase the DTCs by following the directions on the tester's screen
HINT.
Refer to the intelligent tester or Techstream operator's manual for further details