LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> LS 600hL >> Repair and Diagnosis >> Body & Frame >> Windows >> Windshield/WINDOWGLASS >> Power Window Control System >> Data List / Active Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data List / Active Test

  1. DATA LIST 

    HINT:

    Using the intelligent tester or Techstream to read the DATA LIST allows values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed Reading the DATA LIST information early in troubleshooting is one way to save diagnostic time

    CAUTION: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
    1. Connect the intelligent tester or Techstream to the DLC3
    2. Turn the power switch ON (IG).
    3. Turn the tester on.
    4. Enter the following menus:
      1. Intelligent tester - Select. DIAGNOSIS / OBD/ MOBD / (desired system) / DATA LIST
      2. Techstream - Select: Body Electrical / (desired system) / Data List
    5. According to the display on tester, read the "DATA LIST" or "Data List"
      1. Intelligent tester

        MASTER SW: 

        DATA LIST - MASTER SW

        Tester Display Measurement Item/Range Normal Condition
        P/W AUTO SW Driver side power window auto UP/DOWN switch signal / ON or OFF ON Driver side power window auto UP/DOWN switch on master switch operated
        OFF Driver side power window switch on master switch not operated
        PP/W AUTO SW Front passenger side power window remote auto UP/DOWN switch signal / ON or OFF ON Front passenger side power window remote auto UP/DOWN switch on master switch operated
        OFF Front passenger side power window switch on master switch not operated
        RR P/W AUTO SW Rear power window RH remote auto UP/DOWN switch signal / ON or OFF ON Rear power window RH remote auto UP/DOWN switch on master switch operated
        OFF Rear power window RH switch on master switch not operated
        RL P/W AUTO SW Rear power window LH remote auto UP/DOWN switch signal / ON or OFF ON Rear power window LH remote auto UP/DOWN switch on master switch operated
        OFF Rear power window LH switch on master switch not operated
        P P/W UP SW Front passenger side power window remote manual UP switch signal / ON or OFF ON Front passenger side power window remote manual UP switch on master switch operated
        OFF Front passenger side power window switch on master switch not operated
        RR P/W UP SW Rear power window RH remote manual UP switch signal / ON or OFF ON Rear power window RH remote manual UP switch on master switch operated
        OFF Rear power window RH switch on master switch not operated
        RL P/W UP SW Rear power window LH remote manual UP switch signal / ON or OFF ON Rear power window LH remote manual UP switch on master switch operated
        OFF Rear power window LH switch on master switch not operated
        P P/W DOWN SW Front passenger side power window remote manual DOWN switch signal / ON or OFF ON Front passenger side power window remote manual DOWN switch on master switch operated
        OFF Front passenger side power window switch on master switch not operated
        RR P/W DOWN SW Rear power window RH remote manual DOWN switch signal / ON or OFF ON Rear power window RH remote manual DOWN switch on master switch operated
        OFF Rear power window RH switch on master switch not operated
        RL P/W DOWN SW Rear power window LH remote manual DOWN switch signal / ON or OFF ON Rear power window LH remote manual DOWN switch on master switch operated
        OFF Rear power window LH switch on master switch not operated
        WINDOW LOCK STS Power window LOCK switch / ON or OFF ON Power window lock switch LOCK position
        OFF Power window lock switch UNLOCK position
        #CODES Number of trouble codes /Min 0, Max 255 Number of DTCs will be displayed

        D DOOR MOTOR: 

        DATA LIST - D DOOR MOTOR

        Tester Display Measurement Item/Range Normal Condition
        P/W AUTO SW Driver side power window auto UP/DOWN switch signal / ON or OFF ON Driver side power window auto UP/DOWN switch operated
        OFF Driver side power window switch not operated
        D P/W UP SW Driver side power window MANUAL UP switch signal / ON or OFF ON Driver side power window manual UP switch operated
        OFF Driver side power window switch not operated
        D P/W DOWN SW Driver side power window MANUAL DOWN switch signal / ON or OFF ON Driver side power window manual DOWN switch operated
        OFF Driver side power window switch not operated
        GLASS POS -1/4 Margin for jam protection triggering force of window glass within range of fully closed to 1/4 open position / OK or CAUTION OK Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
        GLASS POS - 2/4 Margin for jam protection triggering force of window glass within range of 1/4 to 1/2 open position / OK or CAUTION OK Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
        GLASS POS - 3/4 Margin for jam protection triggering force of window glass within range of 1/2 to 3/4 open position / OK or CAUTION OK Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
        GLASS POS - OPEN Margin for jam protection triggering force of window glass within range of 3/4 to fully open position / OK or CAUTION OK Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
        #CODES Number of trouble codes /Min 0, Max 255 Number of DTCs will be displayed

        P DOOR MOTOR: 

        DATA LIST - P DOOR MOTOR

        Tester Display Measurement Item/Range Normal Condition
        P P/W AUTO SW Front passenger side power window auto UP/DOWN switch signal / ON or OFF ON Front passenger side power window auto UP/DOWN switch operated
        OFF Front passenger side power window switch not operated
        P P/W UP SW Front passenger side power window manual UP switch signal / ON or OFF ON Front passenger side power window manual UP switch operated
        OFF Front passenger side power window switch not operated
        P P/W DOWN SW Front passenger side power window manual DOWN switch signal / ON or OFF ON Front passenger side power window manual DOWN switch operated
        OFF Front passenger side power window switch not operated
        GLASS POS -1/4 Margin for jam protection triggering force of window glass within range of fully closed to 1/4 open position / OK or CAUTION OK Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
        GLASS POS - 2/4 Margin for jam protection triggering force of window glass within range of 1/4 to 1/2 open position / OK or CAUTION OK Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
        GLASS POS - 3/4 Margin for jam protection triggering force of window glass within range of 1/2 to 3/4 open position / OK or CAUTION OK Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
        GLASS POS - OPEN Margin for jam protection triggering force of window glass within range of 3/4 to fully open position / OK or CAUTION OK Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
        #CODES Number of trouble codes/Min 0, Max 255 Number of DTCs will be displayed

        RL DOOR MOTOR: 

        DATA LIST - RL DOOR MOTOR

        Tester Display Measurement Item/Range Normal Condition
        RL P/W AUTO SW Rear power window LH auto UP/ DOWN switch signal / ON or OFF ON Rear power window LH auto UP/ DOWN switch operated
        OFF Rear power window LH switch not operated
        RL P/W UP SW Rear power window LH manual UP switch signal / ON or OFF ON Rear power window LH manual UP switch operated
        OFF Rear power window LH switch not operated
        RL P/W DOWN SW Rear power window LH manual DOWN switch signal / ON or OFF ON Rear power window LH manual DOWN switch operated
        OFF Rear power window LH switch not operated
        GLASS POS -1/4 Margin for jam protection triggering force of window glass within range of fully closed to 1/4 open position / OK or CAUTION OK Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
        GLASS POS - 2/4 Margin for jam protection triggering force of window glass within range of 1/4 to 1/2 open position / OK or CAUTION OK Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
        GLASS POS - 3/4 Margin for jam protection triggering force of window glass within range of 1/2 to 3/4 open position / OK or CAUTION OK Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
        GLASS POS - OPEN Margin for jam protection triggering force of window glass within range of 3/4 to fully open position / OK or CAUTION OK Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
        #CODES Number of trouble codes /Min 0, Max 255 Number of DTCs will be displayed

        RR DOOR MOTOR: 

        DATA LIST - RR DOOR MOTOR

        Tester Display Measurement Item/Range Normal Condition
        RR P/W AUTO SW Rear power window RH auto UP/ DOWN switch signal / ON or OFF ON Rear power window RH auto UP/ DOWN switch operated
        OFF Rear power window RH switch not operated
        RR P/W UP SW Rear power window RH manual UP switch signal / ON or OFF ON Rear power window RH manual UP switch operated
        OFF Rear power window RH switch not operated
        RR P/W DOWN SW Rear power window RH manual DOWN switch signal / ON or OFF ON Rear power window RH manual DOWN switch operated
        OFF Rear power window RH switch not operated
        GLASS POS -1/4 Margin for jam protection triggering force of window glass within range of fully closed to 1/4 open position / OK or CAUTION OK Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
        GLASS POS - 2/4 Margin for jam protection triggering force of window glass within range of 1/4 to 1/2 open position / OK or CAUTION OK Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
        GLASS POS - 3/4 Margin for jam protection triggering force of window glass within range of 1/2 to 3/4 open position / OK or CAUTION OK Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
        GLASS POS - OPEN Margin for jam protection triggering force of window glass within range of 3/4 to fully open position / OK or CAUTION OK Margin is sufficient during manual UP operation
        CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
        #CODES Number of trouble codes/Min 0, Max 255 Number of DTCs will be displayed

        MAIN BODY: 

        DATA LIST - MAIN BODY

        Tester Display Measurement Item/Range Normal Condition
        COM D-DOOR MTR Connection status between power window regulator motor (for driver side) and main body ECU/OK or STOP OK Connection
        Stop No connection
        COM P-DOOR MTR Connection status between power window regulator motor (for front passenger side) and main body ECU/OK or STOP OK Connection
        Stop No connection
        COM RL-DOOR MTR Connection status between rear power window regulator motor LH and main body ECU/OK or STOP OK Connection
        Stop No connection
        COM RR-DOOR MTR Connection status between rear power window regulator motor RH and main body ECU/OK or STOP OK Connection
        Stop No connection
        COM MASTER SW Connection status between master switch and main body ECU/OK or STOP OK Connection
        Stop No connection
        D DOR CTY SW Driver side door courtesy switch signal / ON or OFF ON Driver door open
        OFF Driver door closed
        P DOR CTY SW Front passenger side door courtesy switch signal / ON or OFF ON Front passenger door open
        OFF Front passenger door closed
        RL DOR CTY SW Rear LH side door courtesy switch signal / ON or OFF ON Rear LH side door open
        OFF Rear LH side door closed
        RR DOR CTY SW Rear RH side door courtesy switch signal / ON or OFF ON Rear RH side door open
        OFF Rear RH side door closed
      2. Techstream

      Master Switch: 

      DATA LIST - MASTER SWITCH

      Tester Display Measurement Item/Range Normal Condition
      D Door P/W Auto SW Driver side power window auto UP/DOWN switch signal / ON or OFF ON Driver side power window auto UP/DOWN switch on master switch operated
      OFF Driver side power window switch on master switch not operated
      P Door P/W Auto SW Front passenger side power window remote auto UP/DOWN switch signal / ON or OFF ON Front passenger side power window remote auto UP/DOWN switch on master switch operated
      OFF Front passenger side power window switch on master switch not operated
      RR Door P/W Auto SW Rear power window RH remote auto UP/DOWN switch signal / ON or OFF ON Rear power window RH remote auto UP/DOWN switch on master switch operated
      OFF Rear power window RH switch on master switch not operated
      RL Door P/W Auto SW Rear power window LH remote auto UP/DOWN switch signal / ON or OFF ON Rear power window LH remote auto UP/DOWN switch on master switch operated
      OFF Rear power window LH switch on master switch not operated
      P Door P/W Up SW Front passenger side power window remote manual UP switch signal / ON or OFF ON Front passenger side power window remote manual UP switch on master switch operated
      OFF Front passenger side power window switch on master switch not operated
      RR Door P/W up switch Rear power window RH remote manual UP switch signal / ON or OFF ON Rear power window RH remote manual UP switch on master switch operated
      OFF Rear power window RH switch on master switch not operated
      RL Door P/W up switch Rear power window LH remote manual UP switch signal / ON or OFF ON Rear power window LH remote manual UP switch on master switch operated
      OFF Rear power window LH switch on master switch not operated
      P Door P/W Down SW Front passenger side power window remote manual DOWN switch signal / ON or OFF ON Front passenger side power window remote manual DOWN switch on master switch operated
      OFF Front passenger side power window switch on master switch not operated
      RR Door P/W Down SW Rear power window RH remote manual DOWN switch signal/ ON or OFF ON Rear power window RH remote manual DOWN switch on master switch operated
      OFF Rear power window RH switch on master switch not operated
      RL Door P/W Down SW Rear power window LH remote manual DOWN switch signal / ON or OFF ON Rear power window LH remote manual DOWN switch on master switch operated
      OFF Rear power window LH switch on master switch not operated
      Window Lock Switch Status Power window LOCK switch / ON or OFF ON Power window lock switch LOCK position
      OFF Power window lock switch UNLOCK position
      Number of Trouble Codes Number of trouble codes /Min 0, Max 255 Number of DTCs will be displayed

      D-Door Motor: 

      DATA LIST - D-DOOR MOTOR

      Tester Display Measurement Item/Range Normal Condition
      D Door P/W Auto SW Driver side power window auto UP/DOWN switch signal / ON or OFF ON Driver side power window auto UP/DOWN switch operated
      OFF Driver side power window switch not operated
      D Door P/W Up SW Driver side power window MANUAL UP switch signal / ON or OFF ON Driver side power window manual UP switch operated
      OFF Driver side power window switch not operated
      D Door P/W Down SW Driver side power window MANUAL DOWN switch signal / ON or OFF ON Driver side power window manual DOWN switch operated
      OFF Driver side power window switch not operated
      Glass Position (Close-1/4) Margin for jam protection triggering force of window glass within range of fully closed to 1/4 open position / OK or CAUTION OK Margin is sufficient during manual UP operation
      CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
      Glass Position (1/4-2/4) Margin for jam protection triggering force of window glass within range of 1/4 to 1/2 open position / OK or CAUTION OK Margin is sufficient during manual UP operation
      CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
      Glass Position (2/4-3/4) Margin for jam protection triggering force of window glass within range of 1/2 to 3/4 open position / OK or CAUTION OK Margin is sufficient during manual UP operation
      CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
      Glass Position (3/4-Open) Margin for jam protection triggering force of window glass within range of 3/4 to fully open position / OK or CAUTION OK Margin is sufficient during manual UP operation
      CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
      Number of Trouble Codes Number of trouble codes/Min 0, Max 255 Number of DTCs will be displayed

      P-Door Motor: 

      DATA LIST - P-DOOR MOTOR

      Tester Display Measurement Item/Range Normal Condition
      P Door P/W Auto SW Front passenger side power window auto UP/DOWN switch signal / ON or OFF ON Front passenger side power window auto UP/DOWN switch operated
      OFF Front passenger side power window switch not operated
      P Door P/W Up SW Front passenger side power window manual UP switch signal / ON or OFF ON Front passenger side power window manual UP switch operated
      OFF Front passenger side power window switch not operated
      P Door P/W Down SW Front passenger side power window manual DOWN switch signal / ON or OFF ON Front passenger side power window manual DOWN switch operated
      OFF Front passenger side power window switch not operated
      Glass Position (Close-1/4) Margin for jam protection triggering force of window glass within range of fully closed to 1/4 open position / OK or CAUTION OK Margin is sufficient during manual UP operation
      CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
      Glass Position (1/4-2/4) Margin for jam protection triggering force of window glass within range of 1/4 to 1/2 open position / OK or CAUTION OK Margin is sufficient during manual UP operation
      CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
      Glass Position (2/4-3/4) Margin for jam protection triggering force of window glass within range of 1/2 to 3/4 open position / OK or CAUTION OK Margin is sufficient during manual UP operation
      CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
      Glass Position (3/4-Open) Margin for jam protection triggering force of window glass within range of 3/4 to fully open position / OK or CAUTION OK Margin is sufficient during manual UP operation
      CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
      Number of Trouble Codes Number of trouble codes /Min 0, Max 255 Number of DTCs will be displayed

      RL-Door Motor: 

      DATA LIST - RL-DOOR MOTOR

      Tester Display Measurement Item/Range Normal Condition
      RL Door P/W Auto SW Rear power window LH auto UP/ DOWN switch signal / ON or OFF ON Rear power window LH auto UP/ DOWN switch operated
      OFF Rear power window LH switch not operated
      RL Door P/W Up SW Rear power window LH manual UP switch signal / ON or OFF ON Rear power window LH manual UP switch operated
      OFF Rear power window LH switch not operated
      RL Door P/W Down SW Rear power window LH manual DOWN switch signal / ON or OFF ON Rear power window LH manual DOWN switch operated
      OFF Rear power window LH switch not operated
      Glass Position (Close-1/4) Margin for jam protection triggering force of window glass within range of fully closed to 1/4 open position / OK or CAUTION OK Margin is sufficient during manual UP operation
      CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
      Glass Position (1/4-2/4) Margin for jam protection triggering force of window glass within range of 1/4 to 1/2 open position / OK or CAUTION OK Margin is sufficient during manual UP operation
      CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
      Glass Position (2/4-3/4) Margin for jam protection triggering force of window glass within range of 1/2 to 3/4 open position / OK or CAUTION OK Margin is sufficient during manual UP operation
      CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
      Glass Position (3/4-Open) Margin for jam protection triggering force of window glass within range of 3/4 to fully open position / OK or CAUTION OK Margin is sufficient during manual UP operation
      CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
      Number of Trouble Codes Number of trouble codes /Min 0, Max 255 Number of DTCs will be displayed

      RR-Door Motor: 

      DATA LIST - RR - DOOR MOTOR

      Tester Display Measurement Item/Range Normal Condition
      RR Door P/W Auto SW Rear power window RH auto UP/ DOWN switch signal / ON or OFF ON Rear power window RH auto UP/ DOWN switch operated
      OFF Rear power window RH switch not operated
      RR Door P/W Up SW Rear power window RH manual UP switch signal / ON or OFF ON Rear power window RH manual UP switch operated
      OFF Rear power window RH switch not operated
      RR Door P/W Down SW Rear power window RH manual DOWN switch signal / ON or OFF ON Rear power window RH manual DOWN switch operated
      OFF Rear power window RH switch not operated
      Glass Position (Close-1/4) Margin for jam protection triggering force of window glass within range of fully closed to 1/4 open position / OK or CAUTION OK Margin is sufficient during manual UP operation
      CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
      Glass Position (1/4-2/4) Margin for jam protection triggering force of window glass within range of 1/4 to 1/2 open position / OK or CAUTION OK Margin is sufficient during manual UP operation
      CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
      Glass Position (2/4-3/4) Margin for jam protection triggering force of window glass within range of 1/2 to 3/4 open position / OK or CAUTION OK Margin is sufficient during manual UP operation
      CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
      Glass Position (3/4-Open) Margin for jam protection triggering force of window glass within range of 3/4 to fully open position / OK or CAUTION OK Margin is sufficient during manual UP operation
      CAUTION: May be displayed even when no resistance is applied in each position In this case, there is a foreign object stuck in that position
      Number of Trouble Codes Number of trouble codes /Min 0, Max 255 Number of DTCs will be displayed

      Main Body: 

      DATA LIST - MAIN BODY

      Tester Display Measurement Item/Range Normal Condition
      Communication D-Door Motor Connection status between power window regulator motor (for driver side) and main body ECU/OK or STOP OK Connection
      Stop No connection
      Communication P-Door Motor Connection status between power window regulator motor (for front passenger side) and main body ECU/OK or STOP OK Connection
      Stop No connection
      Communication RR-Door Motor Connection status between rear power window regulator motor LH and main body ECU/OK or STOP OK Connection
      Stop No connection
      Communication RL-Door Motor Connection status between rear power window regulator motor RH and main body ECU/OK or STOP OK Connection
      Stop No connection
      Communication Master SW Connection status between master switch and main body ECU/OK or STOP OK Connection
      Stop No connection
      D Door Courtesy SW Driver side door courtesy switch signal / ON or OFF ON Driver door open
      OFF Driver door closed
      P Door Courtesy SW Front passenger side door courtesy switch signal / ON or OFF ON Front passenger door open
      OFF Front passenger door closed
      RL Door Courtesy SW Rear LH side door courtesy switch signal / ON or OFF ON Rear LH side door open
      OFF Rear LH side door closed
      RR Door Courtesy SW Rear RH side door courtesy switch signal / ON or OFF ON Rear RH side door open
      OFF Rear RH side door closed
  2. ACTIVE TEST 

    HINT.

    Using the intelligent tester or Techstream to perform ACTIVE TESTs allows relays, VSVs, actuators and other items to be operated without removing any parts This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing ACTIVE TESTs early in troubleshooting is one way to save diagnostic time DATA LIST information can be displayed while performing ACTIVE TESTs

    1. Connect the intelligent tester or Techstream to the DLC3.
    2. Turn the power switch ON (IG).
    3. Turn the tester on.
    4. Enter the following menus:
      1. Intelligent tester - Select: DIAGNOSIS / OBD/ MOBD / (desired system) / ACTIVE TEST.
      2. Techstream - Select: Body Electrical / (desired system) / Active Test.
    5. According to the display on tester, perform the "ACTIVE TEST" or "Active Test".
    CAUTION: Be careful to avoid injuries as this test causes vehicle parts to move. During the ACTIVE TEST, the jam protection function does not operate.
    1. Intelligent tester

      D DOOR MOTOR: 

      ACTIVE TEST - D DOOR MOTOR

      Tester Display Test Part Control Range
      P/W UP/DOWN Driver side power window UP/OFF (OFF)
      P/W UP/DOWN Driver side power window DOWN/OFF (OFF)

      P DOOR MOTOR: 

      ACTIVE TEST - P DOOR MOTOR

      Tester Display Test Part Control Range
      P/W UP/DOWN Front passenger side power window UP/OFF (OFF)
      P/W UP/DOWN Front passenger side power window DOWN/OFF (OFF)

      RL DOOR MOTOR: 

      ACTIVE TEST - RL DOOR MOTOR

      Tester Display Test Part Control Range
      P/W UP/DOWN Rear LH side power window UP/OFF (OFF)
      P/W UP/DOWN Rear LH side power window DOWN/OFF (OFF)

      RR DOOR MOTOR: 

      ACTIVE TEST - RR DOOR MOTOR

      Tester Display Test Part Control Range
      P/W UP/DOWN Rear RH side power window UP/OFF (OFF)
      P/W UP/DOWN Rear RH side power window DOWN/OFF (OFF)
    2. Techstream

      D-Door Motor: 

      ACTIVE TEST - D DOOR MOTOR

      Tester Display Test Part Control Range
      Power Window Driver side power window UP/OFF (OFF)
      Power Window Driver side power window DOWN/OFF (OFF)

      P-Door Motor: 

      ACTIVE TEST - P DOOR MOTOR

      Tester Display Test Part Control Range
      Power Window Front passenger side power window UP/OFF (OFF)
      Power Window Front passenger side power window DOWN/OFF (OFF)

      RL-Door Motor: 

      ACTIVE TEST - RL DOOR MOTOR

      Tester Display Test Part Control Range
      Power Window Rear LH side power window UP/OFF (OFF)
      Power Window Rear LH side power window DOWN/OFF (OFF)

      RR-Door Motor: 

      ACTIVE TEST - RR DOOR MOTOR

      Tester Display Test Part Control Range
      Power Window Rear RH side power window UP/OFF (OFF)
      Power Window Rear RH side power window DOWN/OFF (OFF)