Data List / Active Test

HINT.

Using the intelligent tester or Techstream to perform ACTIVE TEST allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed Performing Active Tests early in troubleshooting is one way to save diagnostic time DATA LIST information can be displayed while performing ACTIVE TEST

1. Connect the intelligent tester or Techstream to the DLC3.
2. Turn the power switch ON (IG)
3. Turn the tester on
4. Enter the following menus
   1. Intelligent tester - Select. DIAGNOSIS / OBD / MOBD / BODY NO.5 / ACTIVE TEST / ALL.
   2. Techstream - Select. Body Electrical / Body No.5 / Active Test
5. According to the display on tester, perform the "ACTIVE TEST" or "Active Test"
   1. Intelligent tester

      BODY NO.5: 

      ACTIVE TEST - BODY NO.5
      
      

      Tester Display	Test Part	Control Range
      RR DEF	Rear window defogger relay operation	OFF or ON

   2. Techstream

   Body No.5: 

   ACTIVE TEST - BODY NO.5
   
   

   Tester Display	Test Part	Control Range
   Rear Defogger operation	Rear window defogger relay operation	OFF or ON