VVT Sensor: Installation

HINT:

When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.

1. INSTALL VVT SENSOR 
   1. Install the 4 sensors with the 4 bolts.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

   2. Connect the 4 sensor connectors
   Fig 1: Locating VVT Sensor Connector
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL AIR CLEANER ASSEMBLY RH  (See INSTALLATION )
3. INSTALL AIR CLEANER ASSEMBLY LH  (See INSTALLATION )
4. INSTALL NO. 1 AIR CLEANER INLET  (See INSTALLATION )
5. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY  (See INSTALLATION )
6. INSTALL V-BANK COVER SUB-ASSEMBLY  (See INSTALLATION )