VVT Sensor: Removal

HINT:

When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.

1. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY  (See REMOVAL )
3. REMOVE NO. 1 AIR CLEANER INLET  (See REMOVAL )
4. REMOVE AIR CLEANER ASSEMBLY LH  (See REMOVAL )
5. REMOVE AIR CLEANER ASSEMBLY RH  (See REMOVAL )
6. REMOVE VVT SENSOR 
   1. Disconnect the 4 sensor connectors.
   Fig 1: Locating VVT Sensor Connector
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Remove the 4 bolts and 4 sensors.