April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

CHECK DTC
1. Clear DTC (see DTC CHECK/CLEAR ).
2. Turn the power switch OFF.
3. Disconnect the cable from the negative battery terminal and wait for 1 minute.
4. Connect the cable to the negative battery terminal.
5. Turn the power switch ON (IG).
6. Check DTC.
  OK: P060E is not present.
NG: REPLACE ECM (See REMOVAL )

OK: CHECK FOR INTERMITTENT PROBLEMS (See CHECK FOR INTERMITTENT PROBLEMS )