Definition Of Terms
DEFINITION OF TERMS
| Terms | Definition |
|---|---|
| Monitor Description | Description of what ECM monitors and how to detect malfunctions (monitoring purpose and its details) |
| Related DTCs | A group of diagnostic trouble codes that are output by ECM based on the same malfunction detection logic |
| Typical Enabling Condition | Preconditions that allow ECM to detect malfunctions With all preconditions satisfied, ECM sets DTC when monitored value(s) exceeds malfunction threshold(s) |
| Sequence of Operation | Order of monitor priority, applied if multiple sensors and components involved in single malfunction detection process Each sensor and component monitored in turn and not monitored until previous detection operation is completed |
| Required Sensor/Components | Sensors and components used by ECM to detect each malfunction |
| Frequency of Operation | Number of times ECM checks for each malfunction during each driving cycle "Once per driving cycle" means that ECM only checks for malfunctions once during single driving cycle "Continuous" means that ECM checks for malfunctions whenever enabling conditions met |
| Duration | Minimum time for which ECM must detect continuous deviation in monitored value(s) in order to set DTC Timing begins when Typical Enabling Conditions are met |
| Malfunction Thresholds | Value, beyond which, ECM determines malfunctions exist and sets DTCs |
| MIL Operation | Timing of MIL illumination after a malfunction is detected "Immediate" means that ECM illuminates MIL as soon as a malfunction detected "2 driving cycle" means that ECM illuminates MIL if the same malfunction is detected second time during next sequential driving cycle |