Inspection Procedure

1. Initialize the power window regulator motor (See INITIALIZATION  ).
2. Check if the power window auto up/down function operates (See OPERATION CHECK  ).

   OK: Auto up/down function operates. 

NG: END (PROBLEM DUE TO INITIALIZATION FAILURE) 

OK: Go to next step 

1. Check if the jam protection function operates for applicable power window.

   HINT:

   The jam protection function does not operate from the fully closed position of the door glass to 4 mm (0.157 in.) below that.

   OK: Jam protection function operates. 

   Result 

   DTC RESULT REFERENCE
   
   

   Result	Proceed to
   OK	A
   NG (Driver side power window)	B
   NG (Front passenger side power window)	C
   NG (Rear power window LH)	D
   NG (Rear power window RH)	E

B: REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH  (See REMOVAL  )

C: REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH  (See REMOVAL  )

D: REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH  (See REMOVAL  )

E: REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH  (See REMOVAL  )

A: END