LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> LX 570 >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Generator >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Charging System: Generator: Installation

  1. INSTALL GENERATOR ASSEMBLY 
    1. Install the generator with the 3 bolts and nut.

      Torque: 43 N*m (438 kgf*cm, 32 ft.*lbf) 

      Fig 1: Identifying Generator Bolts And Nut
      G05639295Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the generator connector.
    3. Connect the generator wire with the nut.

      Torque: 12 N*m (122 kgf*cm, 9 ft.*lbf) 

    4. Install the terminal cap.
    5. Install the harness bracket to the generator with the bolt.

      Torque: 31 N*m (316 kgf*cm, 23 ft.*lbf) 

  2. CONNECT OIL COOLER PIPE ASSEMBLY  (See INSTALLATION )
  3. CONNECT VANE PUMP ASSEMBLY  (See INSTALLATION )
    Fig 2: Identifying Wire Harness Bracket Bolt From Generator
    G05639294Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL AIR CLEANER ASSEMBLY  (See INSTALLATION )
  5. INSTALL AIR CLEANER HOSE ASSEMBLY  (See INSTALLATION )
  6. INSTALL FRONT FENDER APRON SEAL FRONT RH  (See INSTALLATION )
  7. INSTALL FAN AND GENERATOR V BELT  (See INSTALLATION )
  8. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY  (See INSTALLATION )
  9. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH  (See INSTALLATION )
  10. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH  (See INSTALLATION )
  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
  12. INSTALL V-BANK COVER SUB-ASSEMBLY  (See INSTALLATION )
  13. INSTALL UPPER RADIATOR SUPPORT SEAL  (See INSTALLATION )
  14. INSTALL ENGINE ROOM SIDE COVER LH  (See INSTALLATION )
  15. INSTALL ENGINE ROOM SIDE COVER RH  (See INSTALLATION )
scientia non olet · About LEMON Manuals