PERFORM ACTIVE TEST HINT:
Performing the Techstream Active Test allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time.
- Connect the Tecshtream to the DLC3.
- Turn the ignition switch ON.
- Perform the Active Test by following the directions on the Techstream screen.
Body No. 4
ACTIVE TEST - BODY NO. 4
| Tester Display |
Test Part |
Control Range |
Diagnostic Note |
| Rear Defogger |
Operate rear window defogger wire |
OFF or ON |
- |