LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> SC 430 >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Rear Speed Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear Speed Sensor: Removal

  1. REMOVE REAR WHEEL 
  2. REMOVE REAR SEAT CUSHION ASSEMBLY (See  REMOVAL  ) 
  3. REMOVE REAR SEAT HEADREST PLATE COVER (See  REMOVAL  ) 
  4. REMOVE WIND DEFLECTOR BOARD ASSEMBLY (See  REMOVAL  ) 
  5. REMOVE REAR SEAT HEADREST PLATE (See  REMOVAL  ) 
  6. REMOVE REAR SEAT HEADREST ASSEMBLY (See  REMOVAL  ) 
  7. REMOVE REAR SEATBACK ASSEMBLY (See  DISASSEMBLY  ) 
  8. REMOVE REAR SPEED SENSOR LH 
    1. Disconnect the sensor and HID connectors.
    2. Remove the bolt and 2 nuts, and then disconnect the No. 2 and No. 3 clamps.
    3. Remove the resin clamp and clamp bolt, and then disconnect the HID connector.
    4. Remove the bolt and then disconnect the No. 1 clamp.
    5. Remove the bolt and sensor.
      NOTE: Keep the sensor tip free from foreign matter.
      Fig 1: Identifying Bolt And Sensor
      G05290713Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE REAR SPEED SENSOR RH 
    1. Disconnect the sensor connector.
    2. Remove the nut, and then disconnect the No. 2 clamp.
    3. Remove the bolt and sensor.
      NOTE: Keep the sensor tip free from foreign matter.
      4. Fig 2: Identifying Bolt And Sensor
      G05290714Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals