LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> SC 430 >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Steering Angle Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Angle Sensor: Installation

  1. INSTALL STEERING SENSOR 
  2. ADJUST CENTER FRONT WHEEL 
  3. INSTALL TURN SIGNAL SWITCH ASSEMBLY (See  INSTALLATION  ) 
  4. INSTALL SPIRAL CABLE SUB-ASSEMBLY (See  INSTALLATION  ) 
  5. POSITION SPIRAL CABLE (See  INSTALLATION  ) 
  6. INSTALL STEERING WHEEL ASSEMBLY (See  INSTALLATION  ) 
  7. CHECK STEERING WHEEL CENTER POINT 
  8. INSTALL STEERING PAD ASSEMBLY (See  INSTALLATION  ) 
  9. INSTALL STEERING PAD SWITCH MODULATOR 
  10. INSTALL SWITCH AND VOLUME CASE 
  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  12. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
  13. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).
scientia non olet · About LEMON Manuals