LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> SC 430 >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Steering Angle Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Angle Sensor: Removal

  1. FOLLOW PRECAUTION 
    1. Follow the PRECAUTION .
  2. SET RADIO RECEIVER ASSEMBLY TO SHIPMENT MODE (See  REMOVAL  ) 
  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  4. PLACE FRONT WHEELS FACING STRAIGHT AHEAD 
  5. REMOVE SWITCH AND VOLUME CASE 
  6. REMOVE STEERING PAD SWITCH MODULATOR 
  7. REMOVE STEERING PAD ASSEMBLY (See  REMOVAL  ) 
  8. REMOVE STEERING WHEEL ASSEMBLY (See  REMOVAL  ) 
  9. REMOVE SPIRAL CABLE SUB-ASSEMBLY (See  REMOVAL  ) 
  10. REMOVE TURN SIGNAL SWITCH ASSEMBLY 
  11. REMOVE STEERING SENSOR 
scientia non olet · About LEMON Manuals