Camshaft Position Sensor: Installation

INSTALL CAMSHAFT POSITION SENSOR
1. Install the sensor with the bolt and stud bolt.
Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf)

Fig 1: Locating Bolt, Stud Bolt And Sensor
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 3 TIMING BELT COVER SUB-ASSEMBLY LH (See TIMING BELT )
INSTALL NO. 1 RADIATOR HOSE
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
ADD ENGINE COOLANT (See COOLANT )
CHECK FOR ENGINE COOLANT LEAKS
1. Check for engine coolant leaks (see ON-VEHICLE INSPECTION ).
INSTALL NO. 1 AIR CLEANER INLET (See INSTALLATION )
INSTALL V - BANK COVER (See INSTALLATION )