Camshaft Timing Oil Control Valve Assembly: Installation

INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1)
1. Install a new O-ring to the oil control valve.
2. Install the oil control valve with the bolt.
  Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf)
3. Connect the oil control valve connector.
  
  Fig 1: Locating Bolt And Oil Control Valve
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Connect the engine wire protector with the 2 bolts.
  Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf)
  
  Fig 2: Locating Bolt And Oil Control Valve
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2)
1. Install a new O-ring to the oil control valve.
2. Install the oil control valve with the bolt.
  Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf)
3. Connect the oil control valve connector.
Fig 3: Locating Bolt And Oil Control Valve
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INTAKE AIR CONNECTOR PIPE
1. Connect the air hose and ventilation hose.
2. Install the bolt and intake air connector pipe with the bolt.
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
3. Tighten the 2 hose clamps.
Torque: 4.0 N*m (41 kgf*cm, 35 in.*lbf)
INSTALL V - BANK COVER
1. Install the cover with the 2 nuts.
Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.