Engine Control System: ECM: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE ECM BOX COVER
1. Remove the 3 bolts and ECM box cover.
NOTE:
- Make sure there is no water and / or foreign matter around the ECM box cover.
- Perform the inspection indoors to avoid rain.
- Prevent water from contacting the ECM's connectors and screw areas.
Fig 1: Locating Bolts And ECM Box Cover
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE ECM
1. Disconnect the 5 ECM connectors.
2. Remove the 2 nuts and ECM from the ECM box.
Fig 2: Locating Nuts And ECM
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002