Inspection Procedure

HINT:

• The detection of DTC P0505 may also be caused by: 1) the floor carpet overlapping onto the accelerator pedal, causing the accelerator pedal to be slightly depressed (throttle position to be slightly open); or 2) the accelerator pedal not being fully released.
• Read freeze frame data using the Techstream. Freeze frame data records the engine conditions when a malfunction is detected. When troubleshooting, freeze frame data can help determine if the vehicle was running or stopped, if the engine was warmed up or not, if the air-fuel ratio was lean or rich, and other data from the time the malfunction occurred.

1. CHECK OTHER DTC OUTPUT (IN ADDITION TO DTC P0505) 

   Result 

   RESULT CHART
   
   

   Display (DTC output)	Proceed to
   P0505	A
   P0505 and other DTCs	B

   B: GO TO RELEVANT DTC CHART 

   A: Go to next step 

2. CHECK CONNECTION OF PCV HOSE 

   NG: REPAIR OR REPLACE PCV HOSE 

   OK: Go to next step 

3. CHECK AIR INDUCTION SYSTEM 

   NG: REPAIR OR REPLACE AIR INDUCTION SYSTEM 

   OK: Go to next step 

4. CHECK THROTTLE VALVE 
   1. Check the throttle valve condition.

   NG: REPLACE THROTTLE BODY 

   OK: REPLACE ECM