VVT Sensor: Inspection: Installation

INSTALL VVT SENSOR
1. Install the 2 sensors with the 2 bolts.
Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf)
INSTALL INTAKE MANIFOLD
1. Install the intake manifold (see INTAKE MANIFOLD ).
INSTALL INTAKE AIR CONNECTOR PIPE (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Fig 1: Locating Bolts And Sensors
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
ADD ENGINE COOLANT (See COOLANT )
CHECK FOR ENGINE COOLANT LEAKS
1. Check for engine coolant leaks (see ON-VEHICLE INSPECTION ).
INSTALL NO. 1 AIR CLEANER INLET (See INSTALLATION )
INSTALL V - BANK COVER (See INSTALLATION )