LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> SC 430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Engine Control System) >> VVT Sensor >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VVT Sensor: Inspection

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT VVT SENSOR 
    1. Measure the resistance between the terminals.

      Standard resistance 

      TEMPERATURE SPECIFIED CONDITION REFERENCE CHART

      Temperature Specified Condition
      Cold 835 to 1,400 Ω
      Hot 1,060 to 1,645 Ω
      Fig 1: Identifying VVT Sensor Connector Terminals
      G05291590Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE: In the table above, the terms "cold" and "hot" refer to the temperature of the coils. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).

      If the resistance is not as specified, replace the sensor.

scientia non olet · About LEMON Manuals