VVT Sensor: Installation

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL VVT SENSOR
1. Install the 2 sensors with the 2 bolts.
  
  Fig 1: Identifying 2 Sensors With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf)
INSTALL INTAKE MANIFOLD
1. Install the intake manifold (see INSTALLATION ).
INSTALL INTAKE AIR CONNECTOR PIPE (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
ADD ENGINE COOLANT (See COOLANT )
CHECK FOR ENGINE COOLANT LEAKS
1. Check for engine coolant leaks (see COOLING SYSTEM ).
INSTALL NO. 1 AIR CLEANER INLET (See INSTALLATION )
INSTALL V-BANK COVER (See INSTALLATION )