Inspection Procedure

CHECK BASIC FUNCTION (ENTRY AND START SYSTEM)
1. Check that the entry lock switch operates normally.
  OK:
  
  Entry lock switch can lock all the doors.
  
  NG: GO TO SMART ACCESS SYSTEM WITH PUSH-BUTTON START (See HOW TO PROCEED WITH TROUBLESHOOTING )
  
  OK: Go to Next Step
CHECK MANUAL UP/DOWN FUNCTION
1. Check that the manual UP/DOWN function using the master switch and regulator switch can operate all the power windows.
  OK:
  
  Manual UP/DOWN function operates normally.
  
  NG: OTHER PROBLEM (GO TO PROBLEM SYMPTOMS TABLE )
  
  OK: Go to Next Step
CHECK REMOTE UP/DOWN FUNCTION
1. Check that the remote UP/DOWN function using the master switch can operate the power windows.
  OK:
  
  Remote UP/DOWN function operates normally.
  
  NG: OTHER PROBLEM (GO TO PROBLEM SYMPTOMS TABLE )
  
  OK: REPLACE MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK)