How To Proceed With Troubleshooting

HINT:

• Use the following procedures to troubleshoot the steering lock system.
• *: Use the Techstream.

1. VEHICLE BROUGHT TO WORKSHOP 
2. INSPECT BATTERY VOLTAGE 

   Standard voltage: 

   11 to 14 V 

   If the voltage is below 11 V, recharge or replace the battery before proceeding.

3. CHECK DTC* 
   1. Check for DTC (See DTC CHECK/CLEAR ).

      Result 

      RESULT REFERENCE
      
      

      Result	Proceed to
      DTC is output	A
      DTC is not output	B

      A:  Go to step  5

      B: Go to Next Step 

4. PROBLEM SYMPTOMS TABLE 

   Result 

   RESULT REFERENCE
   
   

   Result	Proceed to
   Fault is not listed in problem symptoms table	A
   Fault is listed in problem symptoms table	B

   B:  Go to step  6

   A: Go to Next Step 

5. OVERALL ANALYSIS AND TROUBLESHOOTING* 
   1. Terminals of ECU (See TERMINALS OF ECU ).
   2. DATA LIST/ACTIVE TEST (See DATA LIST/ACTIVE TEST ).
6. REPAIR OR REPLACE 
7. CONFIRMATION TEST 

   NEXT: END