Camshaft Timing Control Motor: Removal: Removal

REMOVE V-BANK COVER SUB-ASSEMBLY . Refer to REMOVAL - Step 8
REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY . Refer to REMOVAL - Step 9
REMOVE NO. 1 AIR CLEANER INLET . Refer to REMOVAL - Step 10
REMOVE INTAKE AIR CONNECTOR PIPE See step 8
REMOVE CAM TIMING CONTROL WITH EDU MOTOR ASSEMBLY RH

Fig 1: Locating Camshaft Timing Control Motor Connectors
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Disconnect the 2 camshaft timing control motor connectors.
2. Remove the bolt and engine wire bracket.
3. Remove the 3 bolts and camshaft timing control motor.
  NOTE:
  Do not allow foreign matter to contact the oil seal face of the camshaft timing control motor (connecting surface with timing chain cover).
  
  Fig 2: Locating Camshaft Timing Control Motor Connectors And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the O-ring from the timing chain cover.
REMOVE CAM TIMING CONTROL WITH EDU MOTOR ASSEMBLY LH

Fig 3: Locating Camshaft Timing Control Motor Connectors And Wire Harness Clamp
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Disconnect the 2 camshaft timing control motor connectors and wire harness clamp.
2. Remove the 3 bolts and camshaft timing control motor.
  NOTE:
  Do not allow foreign matter to contact the oil seal face of the camshaft timing control motor (connecting surface with timing chain cover).
  
  Fig 4: Locating Camshaft Timing Control Motor And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the O-ring from the timing chain cover.