DTC Check/Clear
- CHECK DTC
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical/(desired system)/Trouble Codes.
- Check the details of the DTC(s). Refer to DIAGNOSTIC TROUBLE CODE TABLE .
- CLEAR DTC
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical/(desired system)/Trouble Codes.
- Clear the DTCs.