Removal & Installation
WARNING: This page is about the IS 250C Automatic Trans, which is a different variant/trim than selected.
TRANS ID - A750F, A760E, A760F, A760H, A761E, A960E, AB60F
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 5.6 | C | |||
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 0.2 | C | |||
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| Rear | 0.4 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: OIL PUMP: Remove & Replace: | ||||
| 0.6 | B | |||
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: | ||||
| 0.3 | B | |||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 0.6 | C | |||
| Combination Procedure: TRANSMISSION OIL COOLER: Clean: | ||||
| 0.5 | C | |||