LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2012 >> IS F >> Repair and Diagnosis >> Electrical >> Starter >> Starting System (Service Information) >> Relay >> On-Vehicle Inspection >> On-Vehicle Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

On-Vehicle Inspection

  1. INSPECT STARTER RELAY 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 1: Inspecting Starter Relay (ST)
      GTY120666Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Condition Specified Condition
      3 - 5 When battery voltage is not applied to terminals 1 and 2 10 kΩ or higher
      3 - 5 When battery voltage is applied to terminals 1 and 2 Below 1 Ω

      If the resistance is not as specified, replace the relay.

  2. INSPECT STARTER CUT RELAY 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 2: Inspecting Starter Relay (ST)
      GTY120666Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Terminal Connection Condition Specified Condition
      3 - 5 When battery voltage is not applied to terminals 1 and 2 10 kΩ or higher
      3 - 5 When battery voltage is applied to terminals 1 and 2 Below 1 Ω

      If the resistance is not as specified, replace the relay.

scientia non olet · About LEMON Manuals