Diagnostic Trouble Code Table
HINT:
If a trouble code is displayed during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the reference below.
| DTC Code | Detection Item | Trouble Area | Reference |
|---|---|---|---|
| B2311 | Power Window Motor Malfunction | - Power window regulator motor - Battery disconnection when engine switch on (IG) - Incorrect installation of power window components - Overheated power window regulator motor |
Refer to DTC B2311: Power Window Motor Malfunction |
| B2312 | Power Window Switch Malfunction | - Multiplex network master switch - Power window regulator switch - Power window regulator motor - Harness or connector - Multiplex network master switch held in same position for more than 20 seconds - Power window regulator switch held in same position for more than 20 seconds |
Refer to DTC B2312: Power Window Switch Malfunction |
| B2313 | Glass Position Initialization Incomplete | - Power window regulator motor - Power window regulator motor not initialized |
Refer to DTC B2313: Glass Position Initialization Incomplete |