DTC Check / Clear
- CHECK DTC
- Connect the Techstream to the DLC3.
- Turn the power switch ON (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
- Read the DTCs by following the directions on the tester's screen.
HINT:
Refer to the Techstream operator's manual for further details.
- CLEAR DTC
- Connect the Techstream to the DLC3.
- Turn the power switch ON (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
- Erase the DTCs by following the directions on the tester's screen.
HINT:
Refer to the Techstream operator's manual for further details.