LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2016 >> LS 600h >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Pre-Collision System - Service Information >> Seat Belt Control Ecu >> Installation [09/2015 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation [09/2015 - ]: Procedure

  1. INSTALL SEAT BELT CONTROL ECU 
    1. Install the seat belt control ECU with the 2 nuts.

      Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

    2. Connect the 2 connectors.
  2. INSTALL SEAT VIBRATOR MODULE ASSEMBLY (for Ottoman) 

    Refer to PROCEDURE - Step 1

  3. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH 

    Refer to PROCEDURE - Step 5

  4. INSTALL REAR FLOOR FINISH PLATE 

    Refer to PROCEDURE - Step 6

  5. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER 

    Refer to PROCEDURE - Step 7

  6. INSTALL NO. 1 COOLER COVER 

    Refer to PROCEDURE - Step 17

  7. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY 

    Refer to PROCEDURE - Step 9

  8. INSTALL DECK TRIM SIDE BOARD RH 

    Refer to PROCEDURE - Step 10

  9. INSTALL ROPE HOOK 

    Refer to PROCEDURE - Step 12

  10. INSTALL ROPE HOOK ASSEMBLY 

    Refer to PROCEDURE - Step 11

  11. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION [09/2015 - ] ).

  12. INSTALL BATTERY SERVICE HOLE COVER LH 

    Refer to PROCEDURE - Step 13

  13. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 14

  14. CHECK SRS WARNING LIGHT 

    (Refer to DIAGNOSIS SYSTEM [09/2015 - ] )

scientia non olet · About LEMON Manuals