Installation [10/2020 - 10/2023]: Procedure

1. Install the No. 2 ECM bracket to the ECM with the 2 screws.

   Torque: 4.5 N.m (46 kgf/cm, 40 in.lbf) 

   NOTE:

   If the ECM has been struck or dropped, replace it.

1. Install the No. 1 ECM bracket to the ECM with the 2 screws.

   Torque: 4.5 N.m (46 kgf/cm, 40 in.lbf) 

   NOTE:

   If the ECM has been struck or dropped, replace it.

1. Install the ECM with the nut and bolt.

   Torque: 8.0 N.m (82 kgf/cm, 71 in.lbf) 

   NOTE:

   If the ECM has been struck or dropped, replace it.

2. Connect the 3 connectors to the ECM and push down the lever to lock it.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Refer to INSTALLATION [10/2020 - ]

Refer to INSTALLATION [10/2020 - 10/2023]

Refer to WORK PROCEDURE [10/2020 - 10/2022] , or refer to WORK PROCEDURE [10/2022 - 10/2023]

HINT: 

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Refer to AUTOMATIC LEARNING CHART [10/2020 - 10/2023]