LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2021 >> LS 500h AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Service Information >> Knock Sensor >> Inspection [10/2017 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection [10/2017 - ]: Procedure

  1. INSPECT KNOCK CONTROL SENSOR 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance (for Bank 1)

      Tester Connection Condition Specified Condition
      D56-1 - D56-2 20°C (68°F) 120 to 280 kΩ

      Standard Resistance (for Bank 2)

      Tester Connection Condition Specified Condition
      D55-1 - D55-2 20°C (68°F) 120 to 280 kΩ

      HINT: 

      If the result is not as specified, replace the knock control sensor.

      GTY781102Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for Bank 1
      *B for Bank 2
      *a Component without harness connected
      (Knock Control Sensor)
scientia non olet · About LEMON Manuals