| AWD | Includes: R&I Suspension Crossmember Assembly.
DOES NOT include wheel alignment. | 10.0 | | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.2 | | C |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| Rear | | 0.4 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: INPUT SHAFT SEAL: Remove & Replace: |
| | 0.2 | | B |
| Combination Procedure: OIL PUMP: Remove & Replace: |
| | 1.1 | | B |
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: |
| | 0.6 | | B |
| Combination Procedure: OUTPUT SEAL: Remove & Replace: |
| AWD, Both | Includes: R&I Transfer Case Assembly. | 0.8 | | B |
| AWD, Left Side | | 0.2 | | B |
| AWD, Right Side,Transaxle Output Seal | Includes: R&I Transfer Case Assembly. | 0.6 | | B |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANSFER CASE ASSEMBLY: Removal & Installation: |
| | 0.4 | | C |
| Combination Procedure: TRANSFER CASE ASSEMBLY: Replace: |
| Includes: R&I Transfer Case Assembly. | 0.7 | | C |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| AWD | Includes: Programming.
Includes: R&I Transfer Case Assembly. | 1.2 | | C |
| Combination Procedure: TRANSMISSION OIL COOLER: Clean: |
| | 0.5 | | C |