LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2021 >> RC F Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Service Information >> Mass Air Flow Meter >> Installation [09/2014 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation [09/2014 - ]: Procedure

  1. INSTALL MASS AIR FLOW METER SUB-ASSEMBLY 

    HINT: 

    Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

    Refer to INITIALIZATION [09/2014 - ]

    1. Install the mass air flow meter sub-assembly to the air cleaner cap sub-assembly with the 2 screws.
      NOTE:
      • If the mass air flow meter sub-assembly has been struck or dropped, replace it.
      • If reusing the mass air flow meter sub-assembly, be sure to inspect the O-ring.
      • Make sure that the O-ring is not cracked or does not move out of place during installation.
  2. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE 

    See step  2 [09/2014 - 10/2015], or see step  2 [10/2015 - ]

  3. CONNECT VENTILATION HOSE 

    See step  3 [09/2014 - 10/2015], or see step  3 [10/2015 - ]

  4. INSTALL V-BANK COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 96 [09/2014 - 05/2018] , or refer to PROCEDURE - Step 97 [05/2018 - 03/2019] , or refer to PROCEDURE - Step 96 [03/2019 - ]

  5. PERFORM INITIALIZATION 
    1. Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

      Refer to INITIALIZATION [09/2014 - ]

scientia non olet · About LEMON Manuals