Two Wheel Alignment: Adjustment
WARNING: This page is about the LS 500 Base, AWD, which is a different variant/trim than selected.
DOES NOT include straightening or replacement of components.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Front Axle | 1.2 | B | ||
| Rear Axle,Toe-in | 0.6 | B | ||
| Combination Procedure: CAMBER ADJUSTING BOLT: Install: | ||||
| Each | 0.2 | B | ||
| Combination Procedure: ECCENTRIC ADJUSTER: Remove & Replace: | ||||
| Each | 0.2 | B | ||
| Combination Procedure: HEADLAMP CONTROL SYSTEM: Initialize: | ||||
| 0.2 | B | |||
| Combination Procedure: LANE DEPARTURE CAMERA: Adjustment: | ||||
| 1.9 | B | |||
| Combination Procedure: PARKING ASSIST SYSTEMS: Calibrate: | ||||
| Panoramic Monitor System | 0.6 | B | ||
| Ultrasonic Sensor System | 0.4 | B | ||
| Combination Procedure: PRE-COLLISION CAMERA: Adjustment: | ||||
| 2.0 | B | |||
| Combination Procedure: PRE-COLLISION RADAR SENSOR: Adjustment: | ||||
| Millimeter Wave Radar Sensor | 0.6 | B | ||
| Combination Procedure: SIDE OBJECT DETECTION SYSTEM: Calibrate: | ||||
| 0.5 | B | |||
| Combination Procedure: STEERING ANGLE SENSOR: Calibrate: | ||||
| Includes: Test drive to complete operation. | 0.2 | B | ||
| Combination Procedure: STEERING WHEEL: Removal & Installation: | ||||
| 0.5 | B | |||
| Combination Procedure: WHEEL ALIGNMENT: Check: | ||||
| Front Axle | 0.3 | B | ||
| Rear Axle | 0.3 | B | ||
| Combination Procedure: WHEELS (ALL): Rotate: | ||||
| Includes: Tire Pressure Warning System Initialization. | 0.5 | D | ||
| Combination Procedure: YAW RATE SENSOR: Calibrate: | ||||
| 0.2 | B | |||