Removal & Installation
WARNING: This page is about the Mark VII Base, 2.4 L, which is a different variant/trim than selected.
TRANS ID - AOD, AOD-E, AODE-W, AOT, 4R70W, 4R75E, 5R55N, 5R55S
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| | 4.6 | 3.5 | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.6 | | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: FRONT PUMP: Overhaul: |
| | 0.7 | | B |
| Combination Procedure: FRONT PUMP: Remove & Replace: |
| | 0.5 | | B |
| Combination Procedure: OIL COOLER LINES: Flush: |
| | 0.3 | | C |
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: |
| Front | | 0.2 | | B |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| | 0.6 | | C |
TRANS ID - ZF, 4HP 22
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| | 4.6 | | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.6 | | C |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| Rear | | 0.5 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.3 | | C |
| Combination Procedure: FRONT PUMP: Remove & Replace: |
| | 0.5 | | B |
| Combination Procedure: MAIN CONTROL VALVE BODY: Remove & Replace: |
| | 0.8 | | B |
| Combination Procedure: OIL COOLER LINES: Flush/Replace: |
| | 0.3 | | C |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| | 0.9 | | C |