LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 1988 >> Continental Base >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - Multi-Point >> Removal & Installation >> Preparation Procedures >> Fuel Line Connector
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Line Connector

  1. Spring Lock Coupling. Spring lock couplings are available in 3/8" and 1/2" sizes. Use correct Spring Lock Coupling Remover (T81P-19623-G) for size of coupling. Place remover against coupling. Push remover into cage opening to release female fitting from garter spring. Pull male and female halves of coupling apart. Remove tool from disconnected spring lock coupling.
  2. Push Connect Fitting. Push connect fuel line fittings are disconnected by removing hairpin clip from fitting. Spread each clip leg about 1/8" to disengage body. Push legs into fitting. While pulling lightly on triangular end of clip, work it clear of tube and fitting. Pull fitting and steel line in axial direction. Use twisting motion while pulling fitting loose.
scientia non olet · About LEMON Manuals